Petroleum Science >2009,??Issue 4:??389-394 DOI: https://doi.org/10.1007/s12182-009-0059-z
Experimental study of the movement of control fluid in compound perforation Open?Access
文章信息
作者：Zhao Xu,Liu Gonghui,Li Jun and Ding Qingxin
作者單位：
Key Laboratory of Petroleum Engineering, Ministry of Education, China University of Petroleum, Beijing 102249, China;Key Laboratory of Petroleum Engineering, Ministry of Education, China University of Petroleum, Beijing 102249, China;;Key Laboratory of Petroleum Engineering, Ministry of Education, China University of Petroleum, Beijing 102249, China; Beijing Union University, Beijing 100010, China;School of Mechanical and Electronic Engineering, China University of Petroleum, Beijing 102249, China
投稿時間：2008-09-29
引用方式：Zhao, X., Liu, G., Li, J. et al. Pet. Sci. (2009) 6: 389. https://doi.org/10.1007/s12182-009-0059-z
文章摘要
The interaction between the high pressure gas and the control fluid and the movement mechanism of the control fluid in compound perforation were studied by a series of large-scale experiments, where the movement behavior of the control luid was observed. The curves of measured pressure were analyzed, a mathematical model for the rigid movement of the control fluid was established, and the movement velocity of control fluid was analyzed. Moreover, the velocity from experimental results and velocity from an analytical solution were contrasted. The movement of the control luid in the initial stage was similar to the rigid movement; however, the propagation of the pressure wave in the control fluid should be taken into account. Experimental results are significant for research on the movement mechanism of control fluid in compound perforation.
關鍵詞
-
Compound perforation, experimental study, control fluid, gas and liquid interaction, mathematical model