Petroleum Science >2016,??Issue 2:??259-271 DOI: https://doi.org/10.1007/s12182-016-0079-4
Three-dimensional physical simulation and optimization of water injection of a multi-well fractured-vuggy unit Open?Access
文章信息
Research Institute of Enhanced Oil Recovery, China University of Petroleum, Beijing 102249, China; Key Laboratory of Marine Facies, Sinopec, Beijing 102249, China; Key Laboratory of Petroleum Engineering, Ministry of Education, Beijing 102249, China;Research Institute of Enhanced Oil Recovery, China University of Petroleum, Beijing 102249, China; Key Laboratory of Marine Facies, Sinopec, Beijing 102249, China; Key Laboratory of Petroleum Engineering, Ministry of Education, Beijing 102249, China;Research Institute of Enhanced Oil Recovery, China University of Petroleum, Beijing 102249, China; Key Laboratory of Marine Facies, Sinopec, Beijing 102249, China; Key Laboratory of Petroleum Engineering, Ministry of Education, Beijing 102249, China;Research Institute of Enhanced Oil Recovery, China University of Petroleum, Beijing 102249, China; Key Laboratory of Marine Facies, Sinopec, Beijing 102249, China; Key Laboratory of Petroleum Engineering, Ministry of Education, Beijing 102249, China;Research Institute of Enhanced Oil Recovery, China University of Petroleum, Beijing 102249, China; Key Laboratory of Marine Facies, Sinopec, Beijing 102249, China; Key Laboratory of Petroleum Engineering, Ministry of Education, Beijing 102249, China;Research Institute of Enhanced Oil Recovery, China University of Petroleum, Beijing 102249, China; Key Laboratory of Marine Facies, Sinopec, Beijing 102249, China; Key Laboratory of Petroleum Engineering, Ministry of Education, Beijing 102249, China;Research Institute of Enhanced Oil Recovery, China University of Petroleum, Beijing 102249, China; Key Laboratory of Marine Facies, Sinopec, Beijing 102249, China; Key Laboratory of Petroleum Engineering, Ministry of Education, Beijing 102249, China
文章摘要
關鍵詞
-
Multi-well fractured-vuggy unit, Three-dimensional physical model, Similarity criteria, Bottom water drive, Optimization of water injection mode