澳门银河赌场注册送38-澳门银河赌场招人好招吗_百家乐德州_全讯网下载 (中国)·官方网站

Abstract: The development of unconventional petroleum resources has gradually become an important succession for increasing oil production. However, the related engineers and researchers are paying more and more attention to the application of temporary plugging agents (TPAs) for their efficient development. TPAs can expand the stimulated reservoir volume (SRV) and facilitate the flow of oil and gas to the bottom of the well. Particle-gels used as temporary plugging agents have the characteristics of the simple injection process, good deformation, high plugging strength, and complete self-degradation performance, which have been widely applied in recent years. In this paper, five samples of DPPG polymerized by different molecular weights of cross-linking agents were prepared. In addition, infrared spectroscopy analysis, differential calorimetry scanning (DSC) analysis, static particle gel swelling and degradation performance evaluation experiments, and dynamic temporary plugging performance experiments in cores were conducted at 34?°C. Results show that as the molecular weight of the cross-linking agent (at 0.01?g) in the DPPG molecule decreased from 1,000 to 200?Da, the fewer cross-linking sites of DPPG, the looser the microscopic three-dimensional mesh structure formed. The swelling ratio increased from 7 to 33 times. However, the complete degradation time increased from 40 to 210?min. Moreover, the DSC results confirmed that the higher the molecular weight of the cross-linking agent, the worse is chemical stability and the more prone it to self-degradation. DPPG samples had good temporary plugging performance in reservoir cores. DPPGs prepared by the cross-linking agent with smaller molecular weight has a stronger swelling ratio, higher gel strength, and greater plugging strength in the core permeabilities. Moreover, the degraded DPPG is less damaging to the cores. However, their slower degradation rates take a slightly longer times to reach complete degradation. The results of this paper can provide new ideas and a theoretical basis for the development of particle gel-type temporary plugging agents (TPA) with controllable degradation time in low-temperature reservoirs. It can help to expand the application range of existing DPPG reservoir conditions.