Petroleum Science >2022,??lssue 1:??- DOI: https://doi.org/10.1016/j.petsci.2021.10.003
Hierarchically porous Beta/SBA-16 with different silica-alumina ratios and the hydrodesulfurization performances of DBT and 4,6-DMDBT Open?Access
文章信息
作者：Jin-Lin Mei, Yu Shi, Cheng-Kun Xiao, Ao-Cheng Wang, Ai-Jun Duan, Xi-Long Wang,
作者單位：
投稿時間：
引用方式：Jin-Lin Mei, Yu Shi, Cheng-Kun Xiao, Ao-Cheng Wang, Ai-Jun Duan, Xi-Long Wang, Hierarchically porous Beta/SBA-16 with different silica-alumina ratios and the hydrodesulfurization performances of DBT and 4,6-DMDBT, Petroleum Science, Volume 19, Issue 1, 2022, Pages 375-386, https://doi.org/10.1016/j.petsci.2021.10.003.
文章摘要
Abstract
Hierarchically porous Beta/SBA-16 (BS) composite materials, combining the characteristics of the acidity from the Beta zeolite and the three-dimensional structure from SBA-16, were synthesized successfully through a two-step in-situ assembly hydrothermal crystallization method. A series of NiMo catalysts supported on BS with different silica-alumina ratios were prepared. The supports and the corresponding catalysts were characterized by XRD, N2 physisorption, 27Al MAS NMR, TEM, pyridine-FTIR, Raman, XPS and HRTEM. The activities of series catalysts were evaluated by the hydrodesulfurization (HDS) performances of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT). It was found that the Beta crystallites were embedded into SBA-16 through silanols accompanied by dealumination on the T3–T9 sites of Beta crystallites. NiMo/BS-3 with a silica-alumina ratio of 100 exhibited the highest DBT and 4,6-DMDBT HDS activities at the WHSV value of 10 h?1, with the conversions of 95.9% and 86.9% respectively, due to the synergistic effects of the suitable specific surface areas, the relatively large pore size, appropriate acidity, the relatively high sulfidation degree, moderate dispersity and good stacking degree of MoS2 active phases.
Hierarchically porous Beta/SBA-16 (BS) composite materials, combining the characteristics of the acidity from the Beta zeolite and the three-dimensional structure from SBA-16, were synthesized successfully through a two-step in-situ assembly hydrothermal crystallization method. A series of NiMo catalysts supported on BS with different silica-alumina ratios were prepared. The supports and the corresponding catalysts were characterized by XRD, N2 physisorption, 27Al MAS NMR, TEM, pyridine-FTIR, Raman, XPS and HRTEM. The activities of series catalysts were evaluated by the hydrodesulfurization (HDS) performances of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT). It was found that the Beta crystallites were embedded into SBA-16 through silanols accompanied by dealumination on the T3–T9 sites of Beta crystallites. NiMo/BS-3 with a silica-alumina ratio of 100 exhibited the highest DBT and 4,6-DMDBT HDS activities at the WHSV value of 10 h?1, with the conversions of 95.9% and 86.9% respectively, due to the synergistic effects of the suitable specific surface areas, the relatively large pore size, appropriate acidity, the relatively high sulfidation degree, moderate dispersity and good stacking degree of MoS2 active phases.
關鍵詞
-
Beta/SBA-16; Dibenzothiophene; 4,6-Dimethyldibenzothiophene; Hydrodesulfurization