澳门银河赌场注册送38-澳门银河赌场招人好招吗_百家乐德州_全讯网下载 (中国)·官方网站

Abstract: The efficient pyrolysis and conversion of organic matter in organic-rich shale, as well as the effective recovery of pyrolysis shale oil and gas, play a vital role in alleviating energy pressure. The state of carbon dioxide (CO2) in the pyrolysis environment of shale reservoirs is the supercritical state. Its unique supercritical fluid properties not only effectively heat organic matter, displace pyrolysis products and change shale pore structure, but also achieve carbon storage to a certain extent. Shale samples were made into powder and three sizes of cores, and nitrogen (N2) and supercritical carbon dioxide (ScCO2) pyrolysis experiments were performed at different final pyrolysis temperatures. The properties and mineral characteristics of the pyrolysis products were studied based on gas chromatography analysis, X-ray diffraction tests, and mass spectrometry analysis. Besides, the pore structure characteristics at different regions of cores before and after pyrolysis were analyzed using N2 adsorption tests to clarify the impact of fracturing degree on the pyrolysis effect. The results indicate that the optimal pyrolysis temperature of Longkou shale is about 430?°C. Compared with N2, the oil yield of ScCO2 pyrolysis is higher. The pyrolysis oil obtained by ScCO2 extraction has more intermediate fractions and higher relative molecular weight. The ScCO2 can effectively improve the pore diameter of shale and its effect is better than that of N2. The micropores are produced in shale after pyrolysis, and the macropores only are generated in ScCO2 pyrolysis environments with temperatures greater than 430?°C. The pore structure has different development characteristics at different pyrolysis temperatures, which are mainly affected by the pressure holding of volatile matter and products blocking. Compared to the surface of the core, the pore development effect inside the core is better. With the decrease in core size, the pore diameter, specific surface area, and pore volume of cores all increase after pyrolysis.