澳门银河赌场注册送38-澳门银河赌场招人好招吗_百家乐德州_全讯网下载 (中国)·官方网站

Abstract: Fracture geometry is important when stimulating low-permeability reservoirs for natural gas or oil production. The geological layer (GL) properties and contrasts in in-situ stress are the two most important parameters for determination of the vertical fracture growth extent and containment in layered rocks. However, the method for assessing the cumulative impact on growth in height remains ambiguous. In this research, a 3D model based on the cohesive zone method is used to simulate the evolution of hydraulic fracture (HF) height in layered reservoirs. The model incorporates fluid flow and elastic deformation, considering the friction between the contacting fracture surfaces and the interaction between fracture components. First, an analytical solution that was readily available was used to validate the model. Afterwards, a quantitative analysis was performed on the combined impacts of the layer interface strength, coefficient of interlayer stress difference, and coefficient of vertical stress difference. The results indicate that the observed fracture height geometries can be categorized into three distinct regions within the parametric space: blunted fracture, crossed fracture, and T-shaped fracture. Furthermore, the results explained the formation mechanism of the low fracture height in the deep shale reservoir of the Sichuan Basin, China, as well as the distinction between fracture network patterns in mid-depth and deep shale reservoirs.