個人簡歷
個人信息
姓名:黃俊媛
性別:女
職稱:師資博士后
導師類別:無
職務:無
所在系所:安全工程系
Email:jyhuang@cup.edu.cn
個人簡介
主要研究方向為油氣生產設施安全檢監測與智能預警、摩擦磨損機理、高能束流加工等。共發表SCI收錄論文20篇,其中以第一作者的身份共發表SCI收錄論文14篇(其中中科院一區6篇);中文核心6篇;已申請專利7項,其中已授權4項。相關研究成果在Tribology International,Applied Surface Science等領域內國際頂級期刊上發表。
教育及工作經歷
2012.9-2016.6 北京化工大學 機電工程學院 過程裝備與控制工程 學士
2016.9-2019.6 中國石油勘探開發研究院 機械設計及理論 碩士
2019.7-2020.8 北京航天控制儀器研究所 工業技術研究室 結構設計師
2020.9-2025.6 北京航空航天大學 機械工程及自動化學院 材料加工工程 博士
2025.7-至今 中國石油大學(北京) 安全工程系 師資博士后
代表性論文
Huang, J. Y., Zhang, W., Zhang, L., Kong, L., & Jiang, B. (2022). One-step rapid preparation of superhydrophobic peek with mechanical, and chemical stability [J]. Applied Surface Science, 605, 154703.
Huang, J. Y., & Zhang, L. (2022). Effects of hot water on the wettability of superhydrophobic metal surfaces[J]. Applied Surface Science, 598, 153677.
Huang, J. Y., & Yang, S. (2022). Investigation on anisotropic tribological properties of superhydrophobic/ superlipophilic lead bronze surface textured by femtosecond laser[J]. Applied Surface Science, 579, 152223.
Huang, J. Y., Zhang, W., Fang, W., & Yi, Y. (2023). Tribology properties of additively manufactured Ti6Al4V alloy after heat treatment[J]. Tribology International, 185, 108485.
Huang, J. Y., Cai, L., Zhang, W., Zhang, L., Jiang, B., & Kong, L. (2022). Influence of surface structure/wettability on tribological properties of titanium[J]. Tribology International, 174, 107747.
Huang, J. Y., Guan, Y., & Ramakrishna, S. (2021). Tribological behavior of femtosecond laser-textured leaded brass[J]. Tribology International, 162, 107115.
Huang, J. Y., Wei, S., Zhang, L., Yang, Y., Yang, S., & Shen, Z. (2019). Fabricating the superhydrophobic nickel and improving its antifriction performance by the laser surface texturing[J]. Materials, 12(7), 1155.
Huang, J. Y. (2021). Study on tribological properties of 35CrMo steel after laser textured[J]. Optik, 226, 165437.
Huang, J. Y., Wei, S., Zhang, L., Shen, Z., Yang, Y., Yang, S., & Zhang, J. (2020). Preparation of Superhydrophobic 35CrMo Surface and Its Tribological Properties in Water Lubrication[J]. JOM, 72, 368-372.
Huang, J. Y., Zhang, W., Xu, H., Fang, W., (2024). Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion. JOM, 1-11.
Huang, J. Y., Zhu, Z., Zhang, L., Guo, D., Niu, Z., & Zhang, W. (2023). Effect of Contact Angle on Friction Properties of Superhydrophobic Nickel Surface[J]. Photonics, 10, 829.
Huang, J. Y., Zhang, L., Wei, S., Yang, Y., Yang, S., & Shen, Z. (2019). Fabrication of the laser textured nickel surface and its tribological property under the water lubrication[J]. AIP advances, 9(8).
Huang, J. Y., Zhang, W., Effect of Heat Treatment Duration on Corrosion Perfor-mance of Electron Beam Manufactured Ti6Al4V Alloy[J]. Rare Metal Materials and Engineering, 2024, 53(2):357~364.
Huang, J. Y., Zhang, W., Effect of heat treatments on tribology property of Ti6Al4V under dry friction[J], Rare Metal Materials and Engineering, 2024.
授權發明專利與軟件
張偉, 黃俊媛, 蔣布輝. 一種高壓高精度大電流壓電陶瓷恒流驅動電路[P]. 北京市:CN114397935B,2022-10-18.
張偉, 黃俊媛, 蔣布輝. 一種基于電壓閉環的壓電陶瓷諧振頻率跟蹤電路[P]. 北京市:CN114389470B,2024-05-28.
林學春, 楊盈瑩, 張勇, 楊松, 許本有, 黃俊媛, 張景園等. 防止列車通過誤報的掃描雷達判斷方法[P]. 北京市:CN110161524B,2019-08-23.
房衛萍, 張偉, 易耀勇, 孔令其, 羅兵兵, 黃俊媛, 彭翰林. 工件形貌的監控系統及相關方法[P]. 廣東省:CN115194181B,2023-06-06.
科研項目
中國石油大學新任教師啟動基金,2462025SZBH010,油氣管道安全性能提升及智能監測與風險預警系統一體化研究,2025至2027,主持